miniT88
Overview
Fully Integrated C-Band SCADA & Telemetry Satellite Terminal
The StreamSAT miniT88 terminal uses an ultra small C-Band antenna of unique patented design, in conjunction with a burst spread spectrum modem supporting a unique combination of FDMA, TDMA and CDMA techniques. This delivers a groundbreaking combination of terminal size, functionality and service cost for satellite SCADA & Telemetry applications.
Information from your remote equipment can be delivered on a frequent regular basis via the Internet or private backhaul to your office. You may broadcast information on a frequent, regular basis to all your remote sites as well as control your remote equipment from your office or data centre.
The miniT88 product bridges the gap for low data rate satellite telemetry applications between L-Band options (high operating costs for frequent data transfers), and VSAT options (larger terminal size, complicated installation and high equipment cost).
Key Benefits

- C-Band
The use of C-Band geostationary satellites provides high availability, rain fade resiliant coverage 
- Low Service Cost
The multiple access techniques applied allow an efficient sharing of expensive satellite bandwidth 
- Flexible Radio System Architectures
Allows either dedicated (uncontended) operation, or shared (contended) system designs 
- Network Monitoring
Integration with THISS Technologies powerful web-based NMS for real-time and historical system management 
- Low Power Consumption
Designed for minimum average power consumption for sites with limited / solar based power supply
Specifications
- Model
- miniT88 (C-Band SCADA & Telemetry Terminal)
- Part Number
- 20-003-01-3332
- Dimensions
- 0.2m x 0.3m x 0.5m (H x W x L)
- Weight
- 8kg
- Antenna Polarization
- LHCP/RHCP
- TX Frequency Range
- 5.85 - 6.7 GHz
- TX Gain
- Minimum: 16.5 dBi Typical: 18.0 dBi
- BUC
- Integrated 5W, or external OEM BUC
- RX Frequency Range
- 3.4 - 4.2 GHz
- RX Gain
- Minimum: 16.5 dBi Typical: 18.0 dBi
- Input Power
- 13 - 36 VDC
- Power Consumption
- Minimum: 0.5W (standby mode, no TX/RX)
Maximum: 85W (full continuous TX/RX) - Data Interfaces
- Configurable:
- Ethernet (IP Router or Ethernet Bridge Modes)
- Up to 3 x Serial (RS-232 or RS-422)

All specifications are subject to change without notice